Spanish hackers get gamebox usb mode!!!!

http://www.zonadepruebas.com/modules/newbb/viewtopic.php?viewmode=flat&topic_id=11418&forum=8

UPDATE: according to this page:
http://boards.dingoonity.org/other-ga … tems/gamebox-gbx-1001/60 /
What is Load GameBox is not Linux, but Mini. Yes someone has been able to see what “out” for the TxD pin:

RCD = 09AA7B3A

Prepare to Download Mini .

Ingenic Semiconductor Electronics ., Ltd. . Loader Version V1.0
00000080
Jump to 0×80800000

Utopian: What to try “minios.bin” was an excess of confidence (but so do things when nobody knows anything). I saw so enviente … was a Chinese forum not understand anything, but some loose English word referring to the system to boot Ingenic JZ, nor I have.

At the end of the day, the operation is just the kernel boot, and was (for lack of data, there is nothing on the network), one or the other must give equal.

The copy restore the 2GB at the moment I’m not going to do. because I’m not sure that’s good. I can not play or when testing with SD, but I can keep tinkering with NAND.

EDIT:
Every cloud has a silver lining: WHETHER YOU LIVE IN THE MINI …

I read part of the Flash again once they had committed the “mess” to put a “minios.bin” false. I compared each other, and have established beyond doubt that when you put a Mini-SD with a file called “MINIOS.BIN” is updated to address 0×4480000 0×04400000 (512k total). As I made the mistake of putting a file instead of 512k 256k ought to be, the other 256k are not clearly recorded in 0 `s (0xFF).
Therefore, the file system MINI 512k between 0×04400000-0×04480000
Now to see if I curro an upgrade of power (I doubt it possible, that the operational failure, there is nothing to look at the SD, but I always left “to flash” for USB)
Indeed, the “Mini” begins with a list of the files on your hard nand …. interesting …..

(Note: these are only assumptions, not assertions, lest anyone try the same thing and break something because of me. It is simply that matches so well, it seems to be as I have written to a 99% chance)

Gamebox Hacking Scene – Calling all console hackers

More news about the gamebox i dont understand most of this post but hopefully someone out there can help hack this console.

“I actually managed to solder a cable to PIN93, but when i connected it to GND, it blow one of the fuses next to the power connector – obviously the pin is connected to VCC somewhere under the CPU and so I did a short-circuit, I should have checked that before. This will make it really hard to get the pin down to GND because it would probably have to be liftet from the board.

The other option is to get the CPU into USB booting mode. To do that, Pins UART_TX and ADIN1 have to be altered. UART_TX is accessible on a test pad on the board, I guess that ADIN1 also has to be accessible somewhere because USB booting is probably how the system is programmed at the factory, but I have not yet found it. As soon as it’s in USB booting mode, it should be detected as a usb device by the PC and we would be able to access it with the driver and tools provided by Ingenic. I’ll keep investigating…”